High Quality Flow Control Valves, Power Unit Hydraulic Cylinder, Hydraulic Power Pack Elevator Suppliers in China

Home > Products > Working Platform > POWER UNIT FOR AERIAL WORKING PLATFORM 1

POWER UNIT FOR AERIAL WORKING PLATFORM 1

POWER UNIT FOR AERIAL WORKING PLATFORM 1

Product Description


This power unit is specially designed for aerial Working Platform, providing it with lifting and descending function, the quantitative pressure compensating throttle valve can make the platform descend steady.



sfg20sfg21

Model Specifications

Type 型号 Motor 电机

Pump Displacemen

t 泵排量(cc/r)

Tank Capacit

y 油箱容积(L)

Pressure

压力 (MPa)

Mounting

安装方式

Oil Port

油口尺寸

HPU2-89GKDHEHCFF(Y)A

AC220V 0.75Kw 1440rpm 50Hz

1.6 4 18

Horizontal

卧式



G1/4"




Special Notes


1、 For different flow rate pump, pressure and motor power, please check the ordering guidance.

2、 If you need manual oil discharge device for emergency , please specify when ordering.

3、 This power unit can not run continuously (1 min ON,9 min OFF), it can work repeatedly.

4、 Before installation, ensure that the hydraulic components such as the oil cylinder,oil pipe and joints are clean and free from any impurities.

5、 The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HM46 hydraulic oil is recommended.

6、 This hydraulic power unit is suitable for horizontal installation.

7、 Check that whether there is enough oil in the oil tank immediately after the first operating of the system.

8、 The hydraulic oil should be replaced after the first 100 hours* use of the system, and change the oil every 3,000 hours after that.












CHANGZHOU ROHN HYDRAULIC SCI-TECH CO.,LTD

 

We are devoted to hydraulic power unit for 10 years, In addition, we also produce various circuit block, hydraulic accessories as well as provide professional services for the customers.We accept customized. The company was found in May 2011, it's located in Yongxin Road No58 Panjia Xueyan Town Wujin District Changzhou Jiangsu Province China. We are devoted to self

Company Info

  • Company Name: CHANGZHOU ROHN HYDRAULIC SCI-TECH CO.,LTD
  • Representative: LVJUN
  • Product/Service: Hydraulic Power Unit , Hydraulic Pump Unit , Hydraulic Power Station , Power Unit , Hydraulic Poppet Valve , Hydraulic Pilot Valve
  • Capital (Million US $): 200万元整
  • Year Established: 2016
  • Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
  • Export Percentage: 11% - 20%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 20
  • No. of R&D Staff: Fewer than 5 People
  • No. of QC Staff: 21 -30 People
  • Factory Size (Sq.meters): Below 1,000 square meters
  • Factory Location: No.13, Kuanda Road, Xueyan Town, Wujin District, Changzhou city
  • Contact Person: Mr. songwei
  • Tel: 86-519-86056606
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters