Model No.: CD, MD
Wire rope electric hoists are widely used and very popular among user because of their characteristics of tight structure, smart body, safety and reliability, common-used parts, well changeable property, strong lifting capacity as well as convenient maintenance.
The hoists exist in form of stationary Style and crab-style. The former is divided into four styles that is, A1, A2, A3, and A4 according to the position (up, down, left, and right) of the fixed trestle. It can be installed directly on the frame. The latter with movable function can be installed on the track. CD1 model lifts with single speed, and MD1 model not only with usual speed but also with low speed.
On such a basis, CD1 (GD), MD1 (GDS) and WH164 20t, 32t are developed by our technicians. They share the same structure principles and installation ways with the original CD1 and MD1. The following contents all take CD1 and MD1for example.
Our running scope mainly lies in series of electric hoist with 0.25~32t load and 3m~30m height. In addition, your special needs shall be met and non-standard hoists shall be manufactured.
1. High durability
2. Low maintenance cost
3. Hassle free operation
4. Easy handling
5. Long working life
The crab-model installed on many kinds of cranes of suspending from T-steel can lift heavy objects straight or in a curve. The stationary ones installed on fixed trestle can lift objects vertically or from different angles.
The products are widely used at industrial ore enterprises, railway, harbors, warehouses and materials sites etc. They are indispensable machinery to improve working conditions and efficiency in manufacturing.
Applicable scope and working conditions
The product applies to such an environment as no faire, no explosive danger, no corrosive media and no dirt exist. And the temperature is between 20° C below zero and 40° C up zero, the wetness is no higher than 85%, the applicable power source is 3_phase alternating current (A. C for short), 50 Hz (60Hz) frequency and (380V~66V) voltage. Their rated load must be reduced by 20%accordingly as their working grade increases by one grade compared to their middle-lever working grade.
Overload protection, Main lifting motor with thermal protection, Hooks with latch, Rubber buffers
Protective earthing, Crane switch and travel end switch, Emergency switch.
Sub-assemblies characteristic are tested before assembly.
All cranes must be pre-assembled and tested before leaving factory and offer the certification of test.
Design and construction rules:
All the standards which is required for the crane is the Chinese standard
Primer and finishing paint
Average thickness: About 100 microns.
Color: According to your demand.
|Hoisting height||M||3, 6, 9||6, 9, 12||6, 9, 12, 18, 24, 30||9, 12, 18, 24, 30|
|Hoisting speed||M/MIN||8(0.8/8)||8(0.8/8)||8(0.8/8)||7(0.7/7)||3.5 (0.35/3.5)|
|ZDS1 0.2/0.8||ZDS1 0.2/1.5||ZDS1 0.4/3.0||ZDS1 0.4/4.5||ZDS1 0.8/7.5||ZDS1 1.5/13||ZDS1 1.5/13|
|Rotation speed||Rotation speed(r/min)||1380||1380||1380||1380||1380||1400||1400||1400|
|Rotation speed||Rotation speed(r/min)||1400||1380||1380||1380||1380||1380||1380||1380|
|Power|| || ||AC 380V, 50HZ, 3P|
Product Categories : Electric Hoist
Premium Related Products