Elecrtic Wire Rope Hoist (CD1 OR MD1)
Basic Info
Model No.: CD1 OR MD1
Product Description
Model NO.: CD1 OR MD1 Application: Construction Usage, Workshop Usage, Mineral Area Usage Power Source: Electric Certification: ISO9001: 2000, CE ISO 9001: 2000: Pass Ohsas 18001: 1999: Pass Painting Color: According to Your Demand Voltage Loss Protection Function: Include Double Limit Switch: Include Trademark: KUANGYUAN Origin: Changyuan, China Type: Small Crane Sling Type: Wire Rope Moving Type: Car type Condition: New ISO 14001: 2004: Pass Working Duty: A3~A5 Weight Overload Protection Device: Include Current Overload Protection Function: Include Main Electrical Parts: Siemens Brand Specification: National standard HS Code: 84251100 Elecrtic wire rope hoist
Electric wire rope Hoist is assembled by several parts: Hoisting Gear Box, Hoisting Motor with brake, Rope Drum, Electric Control Panel and Traveling Trolley. All these units are separately accessible and promptly disassembled cost and stopped.
Motor: Hoist Motor is a taper type rotor motor with braking, it is made by Nanjing special motor factory, it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.
Gear Box: Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
Wire Rope: Hoisting ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
Rope Drum: Grooved hoist Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.
Electric apparatus controlling system: Model CD1 and MD1 hoist is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V, 36V or 24V(safety voltage).
Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thickened and dilated, so that it is not easy to be damaged.
Hook: The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing the pulley is thicken and dilated than domestic common pulley.
Contact us if you need more details on Electric Hoists. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Wire Rope Electris Hoist、Electric Winch. If these products fail to match your need, please contact us and we would like to provide relevant information.
Electric wire rope Hoist is assembled by several parts: Hoisting Gear Box, Hoisting Motor with brake, Rope Drum, Electric Control Panel and Traveling Trolley. All these units are separately accessible and promptly disassembled cost and stopped.
Motor: Hoist Motor is a taper type rotor motor with braking, it is made by Nanjing special motor factory, it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.
Gear Box: Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
Wire Rope: Hoisting ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
Rope Drum: Grooved hoist Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.
Electric apparatus controlling system: Model CD1 and MD1 hoist is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V, 36V or 24V(safety voltage).
Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thickened and dilated, so that it is not easy to be damaged.
Hook: The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing the pulley is thicken and dilated than domestic common pulley.
Model | CD1 | |||||||||
Capacity | Tons | 0.5 | 1 | 2 | 3 | 5 | 10 | 16 | ||
Hoisting height | M | 6, 9, 12 | 6, 9, 12, 18, 24, 30 | 9, 12, 18, 24, 30 | ||||||
Hoisting speed | M/MIN | 8 | 8 | 7 | 3.5 | |||||
Travel speed | M/MIN | 20/30 | 20/30 | 20/30 | 20/30 | 20/30 | 20/30 | 18 | ||
Wirerope | Dia. (mm) | 4.8 | 7.4 | 11 | 13 | 15 | 15 | 17.5 | ||
Spec. | 6x37+FC | 6x37+FC | 6x37+FC | 6x37+FC | ||||||
Hoisting motor | Type | Type | ZD121-4 | ZD122-4 | ZD131-4 | ZD132-4 | ZD141-4 | ZD151-4 | ZD151-4 | |
Power | Power(kW) | 0.8 | 1.5 | 3 | 4.5 | 7.5 | 13 | 13 | ||
Rotation speed | Rotation speed(r/min) | 1380 | 1380 | 1380 | 1380 | 1400 | 1400 | 1400 | ||
Current | (A) | 2.2 | 4.3 | 7.6 | 11 | 18 | 30 | 30 | ||
Travel motor | Type | Type | ZDY111-4 | ZDY111-4 | ZDY112-4 | ZDY112-4 | ZDY121-4 | ZDY121-4 | ZDY121-4 | |
Power | Power(kW) | 0.2 | 0.2 | 0.4 | 0.4 | 0.8 | 0.8x2 | 0.8x2 | ||
Rotation speed | Rotation speed(r/min) | 1380 | 1380 | 1380 | 1380 | 1380 | 1380 | 1380 | ||
Current | Current(A) | 0.72 | 0.72 | 1.25 | 1.25 | 2.4 | 2.4 | 2.4 | ||
Power | 3PAC 220v/230v/380v/400v/415v/440v380V, 50HZ/60HZ, |
Product Categories : Electric Hoist
Premium Related Products
Other Products
Hot Products
Gantry Crane for Girder Elevate 01Shipyard Gantry Crane 08 with SGSBridge Crane with Hydraulic Bucket for Garbage (15T-28.5M)General Gantry Crane 07 (TGC-04)Precast Yard Gantry Crane 04 with SGSChemical Equipment Large Vertical ScaffoldingDn11 End Carriage with Ce GB Fem DIN CertificateTravelling Motor for Crane Low PriceFixed Base Cantilever Crane (BZ)ISO Certificated Electric Capstan Winches 10 Ton Hoist WinchSingle and Double Lifting Speed Electric Wire Rope Hoist (CD/MD)Prefabricated Steel Structure WarehouseSingle Girder Overhead CraneCustomize Single Girder Hoist for CraneMovable Hydraulic Scissor Lift Table, Working PlatformTwo or Multi-Clamshell Electro-Hydraulic Grab for Sale (DYZ)