Low Headroom Electric Overhead Traveling Crane Hoist

Model NO.: LDC Type: Electric Hoist, Electric Block Lift Speed: 2~8m/min Chain Falls: 2 Driven Type: AC Running Mode: Moving Installation: Eot Crane Control Method: Remote Control & Pendent Line Control Power Supply System: Cable with Cable Drum Specification: CE; GOST; ISO; SGS CERTIFIED HS Code: 84251100 Application: Double Beam Crane, Gantry Crane, Bridge Crane, Single Grinder Crane, Small Crane, Workshop Crane Sling Type: Wire Rope Maximum Lifting Height: >20m Certification: CE, ISO9001:2000, GOST;ISO Feature: Low Headroom Structure: Bridge Crane Type of Work: Middle-Level Lifting Height: 3m,6m,9m,12m,16m,19m,30m Trademark: Kuangyuan Origin: Henan Low Headroom Electric Overhead Traveling Crane Hoist

The single beam  crane is small lifting capacity and travel along high I-Steel track.
Features:
tight dimension, low building headroom, light dead weight and light wheel load. It is a light duty track traveling crane with trajectory which applies to and used at machinery, assembling sites and warehouses.
This product adopts ground control and works at a temperature of -25--40 centigrade. It is prohibited to use the equipment at combustible, explosive or corrosive environment.
The crane applies to works and storehouses where it is ≥100 mm height between the rail surface and the rafter of roof truss.
The trolley forms a set with electric hoist, The mechanism of crane is nimble, with safe and reliable motion. It is capable of designing and making non-standard hoisting equipment.
The capacity: 0.5T, 1T, 2T, 3T, 5T; Span from 3m to 16m 
Technical dates:

Lifting capacity (T)	0.5,1,2,3T		5T
Span(M)	3-16M
Crane traveling mechanism	Traveling speed(m/min)		20,30	20,30
	Motor	Model	ZDY112-4	ZDY121-4
		Power(kw)	0.4×2	0.8×2
		Rotation (m/min)	1380	1380
Lifting mechanism (electric hoist)&electric hoist traveling mechanism	Electric hoist model		CD1/MD1	CD1/MD1
	Lifting speed (m/min)		8,8/0.8	8,8/0.8    7,7/0.7
	Lifting height (m)		6 ,9 ,12, 18	9,12,18
	Traveling speed (m/min)		20(30)	20(30)
	Motor		Taper Squirrel-cage type	Taper Squirrel-cage type
Work duty	A3-A5
Power supply	380V 50HZ three phase
Wheel diameter	130mm		130/150mm
section rail	120a-132c		120a-132c  125a-163c

Control method:
Remote control or pendent line with press button or both
Design and construction rules:
All
Design and construction rules:
the standards which is required for the crane is the Chinese standard
Painting:
Primer and finishing paint
Color: according to your demand.
Average thickness: about 100 microns
Environmental conditions:
a crane for the three-phase AC power, the rated frequency of 50HZ, rated voltage of 380V, also can be customized according to customer needs a variety of voltage and frequency conditions.
crane installation location does not exceed the altitude of 2000M
A crane work environment may be flammable and explosive and corrosive gases
A crane was being lifted does not allow molten metals, toxic substances and flammable materials.
Hoist way operating mode and the rotation of two manual and electric options.
User information:
Users in the order or signed contract must be the basic parameters of the machine (rated from the weight of hoisting height, the effective radius, etc.) clearly described in welcome to online consultation, if necessary or E-mail it to us; you will receive our prompt and careful.

Contact us if you need more details on Hoist. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Crane Hoist、Traveling Crane Hoist. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Electric Hoist